The lab · Belfast

What’s on the bench.

In terms of recovery results, there is as much value from the equipment used and the discipline employed as there is from skill. The honest truth about the hardware that makes up our Belfast lab is outlined below. Each tool is explained, along with what it does and why it changes what can be recovered.

All work in-house
Hardware imagers
Donor parts library
// in short

Tools most shops don’t have.

USB docks and software tools provide an easy way to perform simple data recovery projects. All other recovery projects (weak heads, bad firmware, dead controllers) require specialised hardware designed specifically for those problems.

PC-3000
Firmware work
DeepSpar
Weak-drive imaging
Atola Insight
Forensic imaging
Write-blockers
Read-only intake
// imaging

Hardware imagers, not software scans.

This is the most significant difference between a commercial recovery laboratory and a downloaded recovery program.

When a damaged hard drive is plugged into a regular workstation (normal computer), the operating system will treat the drive as if there were no issues with it. Long timeout periods, repeated attempts to read/write data, and background chatter the drive never asked for will ensue. When dealing with weak heads or scratched platters, that type of treatment finishes the drive off. A hardware-based imager acts as a buffer between us and the drive. It gives us back control over how we interact with the disk: per-sector timeout periods, selectively reading around damaged areas, controlling individual heads, and safely cycling the power when the drive locks up.

Our DeepSpar kit is designed to extract the maximum amount possible from actively failing disks and capture the most important information first. The Atola Insight provides forensic image capabilities (write-protected, hash-verified), which matter for legal applications and provide a record of the unaltered original for any customer who needs it.

// firmware

PC-3000: talking to a drive’s firmware.

For the drives that have no problems spinning but show nothing.

All hard disk drives carry their own unique personal operating system: the firmware within the service area of the drive, which contains the mapping tables and defect listings used to turn the platters into a working storage device. When these firmware components fail, the user experiences the familiar “ghost” symptoms: a reported capacity of 0 GB, incorrect identifier reporting, and/or being detected by software but unable to read while sounding completely normal.

The PC-3000 is the industry’s standard tool for this purpose. It understands all the technical languages of each of the manufacturers (Seagate, WD, Toshiba, Samsung and many others) so we can read and repair service-area modules of these manufacturers as well as navigate around failed heads shown on the head map and restore a drive to a point at which it can be imaged. There are no Windows applications that can access those functions.

// mechanical

Mechanical work, on the Belfast bench.

Head replacements and donor parts are both handled in our lab.

With respect to failed or damaged heads from a drop, the solution is going to be physical replacement with a matched donor component. We perform this type of replacement work here in our laboratory on the Belfast bench.

The quieter side of mechanical repair is the “donor library”, which includes shelving units filled with hard drives purchased and catalogued for their usable parts. Donors need to match closely: model series, site of manufacture, firmware revision. Often having the correct donor available when needed is the deciding factor between recovering your data this week and searching through half the world’s parts markets.

// flash & discipline

Flash, chip-off, and the habits around it all.

The equipment for solid-state, along with the rules to ensure your job is protected.

When a controller dies in a solid-state failure, there’s an additional set of tools for retrieving data from memory chips directly using NAND readers or adapters. The monolithic work required by modern one-piece cards and sticks involves de-scrambling the raw flash data, applying error correction, and reconstructing translators to turn the raw data into actual file structures.

Surrounding all of this are the consistent practices we follow. Every medium is imaged as read-only prior to any other action being performed. All operations occur against the duplicate copy of the original. Prior to returning any recoveries to customers, we verify them. Additionally, since each risky read on a device under failure costs capital which cannot be recovered, the initial attempts at recovery will always occur through a methodical approach, which is the reason we provide our free diagnostic test prior to any services being agreed.

// questions

Common questions, answered.

Hardware imagers that control a failing drive sector by sector, firmware tools for drives that identify themselves incorrectly, a donor parts library and a safe workspace to perform physical repairs, and write-blockers so that no changes are made to the original device: these four things make up the differences between a shop with software and a lab. Software on its own does not cover any of the “hard” problems.

These tools can be purchased commercially. However, a PC-3000 type setup will cost you well into five figures before training. The tool itself is the smaller part of the problem: knowing which firmware module to access for what type of drive family and being able to have the correct donor parts readily available takes years of experience working on different types of failed devices.

Yes. Nothing is forwarded, outsourced or sent overseas: all jobs are worked on in-house on this bench located at Cromac Square. Please obtain a quote first, via either telephone or our quote form on this web page. Once you have your quote, please feel free to visit us (no appointment needed, Monday to Friday, 9am to 5:30pm), or use our UK postal service to send your failed data storage unit from anywhere in the United Kingdom.

// see it work

The bench in action, job by job.

The recovery case files show examples of using these tools on real failures, or get a quote first via phone or the request form, then send in your failed unit and let our diagnosis of your failure speak for itself.

Call us — 028 9002 0144
Mon–Fri · 9am–5:30pm · No fix, no fee
Start a free diagnostic →
028 9002 0144